Apg MPX Slave Sensor user manual Manual de usuario descargar pdf (Pagina 43)

Rev. B, 4/13 MPX Series Magnetostrictive Level Sensors

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Certificate:

2397437

Master Contract:

237484

Project:

2397437

Date Issued:

May 18, 2011

DQD 507 Rev. 2009-09-01 Page: 2

Notes:

• The model code breakdown is as follows: a= E or R; b= 1, 2 or 3; c= A, B, C, D, E, F, Z, or Y; d= N, B, D, or

Y; e= F, R, P, N, or O; f= W or S; g= A or B; and hhh= 12–153 for the 1/2" stem or 48–300 for the 1" stem.

• The equipment is intended to be installed as required by the applicable electrical code (CEC, NEC) and as

specied by the manufacturers Installation Instructions.

• The installation will be inspected by the authority with jurisdiction in the area where installed.

APPLICABLE REQUIREMENTS

CSA C22.2 No 0-10 General Requirements – Canadian Electrical Code, Part

II – Tenth Edition

CSA C22.2 No 30-M1986 (R 2007) Explosion-Proof Enclosures for Use in Class I

Hazardous Locations Industrial Products – Third

Edition

CSA C22.2 No 142-M1987 (R 2009) Process Control Equipment Industrial Products – Third

Edition

CSA C22.2 No 213-M1987 (R 2008) Non-incendive Electrical Equipment for Use in Class I,

Division 2 Hazardous Locations Industrial Products –

First Edition

CSA C22.2 No 60079-0-07 Electrical apparatus for explosive gas atmospheres –

Part 0: General requirements – First Edition

CSA C22.2 No 60079-1-07 Electrical apparatus for explosive gas atmospheres –

Part 1: Flameproof enclosures "d" – First Edition

CSA E60079-15-02 (R 2006) Electrical Apparatus for Explosive Gas Atmospheres –

Part 15: Type of Protection "n" – Second Edition

UL 508 Industrial Control Equipment - Seventeenth Edition;

Reprint with Revisions Through and Including April

15, 2010

UL 1203 Explosion-Proof and Dust-Ignition-Proof Electrical

Equipment for Use in Hazardous (Classied) Locations

- Fourth Edition; Reprint with Revisions through and

Including October 28, 2009

ANSI/ISA-12.12.01-2007 Nonincendive Electrical Equipment for Use in Class

I and II, Division 2 and Class III, Divisions 1 and 2

Hazardous (Classied) Locations

MARKINGS

The following markings are provided on a UL Recognized (PGJI2) adhesive nameplate manufactured by

Datamax, type FantaStock-HCW, printed with a resin ribbon manufactured by Datamax, type Greatribbon

SDR or SDR-5, which is suitable for indoor/outdoor use on polyurethane paint coatings, at a maximum service

temperature of 135°C or higher. Alternatively a screw or rivet secured metal nameplate or other permanent

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Apg MPX Slave Sensor user manual Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Apg MPX Slave Sensor user manual