Apg AGV-1000 Collision Avoidance user manual Manual de usuario descargar pdf (Pagina 13)

Rev. A3, 10/08 AGV-1000

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

RANDOM PULSE 1-6 (0 to 120 msec.)

The RANDOM PULSE parameters are used to set delays between samples from

each of the six front-end circuits. By assigning varied delays between samples,

the user can reduce transducer cross-talk and multiple-echo interferences. The

default settings have been used with good results and should not need

adjustment in most applications.

DETECT ADD (0 to 1 m)

The DETECT ADD feature “adds” a detection zone (of the specified length) in

front of the SLOW zone (see figure below). If an object enters the DETECT

ADD zone, then the sensor increases the sample rate and starts random pulsing.

This is designed to increase the response time of the sensor should the object

enter the SLOW zone.

Slow Zone

Stop Zone

Transducers

Vehicle

Go Zone

Detect

Add

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Apg AGV-1000 Collision Avoidance user manual Manual de usuario Pagina 13